Description

The Greiner GHS-3 60/160 is a four-point hydraulic lifting gantry system manufactured by Greiner-Fahrzeugtechnik GmbH in Neuenstein, Germany, in August 2007. This 4/2 ram lifting system comprises two lifting portals, each equipped with a triple-stage telescopic cylinder, and is supplied with a remote control for operational flexibility. The unit carries serial number 1548 and is designed for heavy industrial lifting applications requiring controlled, synchronized elevation. Technical specifications for the system indicate a maximum lifting height of 5,890 mm measured from the floor to the underside of the head beam. Operating pressure is 250 bar with a maximum valve setting of 180 bar. Each telescopic cylinder provides individual strokes of 1,375 mm, 1,285 mm, and 1,240 mm across its three stages, yielding a combined stroke of 3,900 mm. When configured with two lifting portals, maximum loads per portal are 82,000 kg at stage one, 56,000 kg at stage two, and 32,000 kg at stage three. The lifting ram measures 1,220 mm in length and 700 mm in width, with a transport height of 1,990 mm including the head plate. Running gear and rail system track width is 565 mm, with a wheel diameter of 195 mm. Each lifting ram weighs approximately 1,100 kg. This used Greiner lifting system is available through Hazelrigg International. Prospective buyers should confirm specifications and condition with our team prior to purchase, as reference is made to drawing U.HG.025.0001 Type Sheet.

Specifications

Key Features

• ✓0 General Information:
• ✓Maximum lifting load:
• ✓Operating pressure:
• ✓Max. valve setting:
• ✓Stroke / telescopic cylinder 1st stage: 1,375 mm
• ✓Stroke / telescopic cylinder 2nd stage: 1,285 mm
• ✓Stroke / telescopic cylinder 3rd stage: 1,240 mm
• ✓Stroke / telescopic cylinder total: 3,900 mm